Certified Metal Craft

Placeholder

Facility

Facility

Facility

Certified Metal Craft is a 32,000 sq. ft. Brazing and Heat Treating Facility.

Furnace Temperature Work zone Atmosphere Notes
V-1 600° – 2450° F 15″W x 10″H x 24″D Vacuum / argon / nitrogen Furnace capable of partial pressure operation. 2
V-2 900° – 2450° F 48″W x 48″H x 63″D Vacuum / argon Furnace capable of partial pressure operation. 2
V-3 900° – 2450° F 54″W x 54″H x 58″D Vacuum / argon Furnace capable of partial pressure operation. 2
V-4 900° – 2450° F 36″W x 36″H x 48″D Vacuum / argon Furnace capable of partial pressure operation. 1 & 2
V-5 900° – 2450° F 36″W x 36″H x 48″D Vacuum / argon Furnace capable of partial pressure operation. 1 & 2
V-6 900° – 2400° F 48″W x 48″H x 48″D Vacuum / argon Furnace capable of partial pressure operation. 1 & 2
V-7 900° – 2400° F 48″W x 48″H x 48″D Vacuum / argon Furnace capable of partial pressure operation. 1 & 2
Furnace Temperature Work zone Atmosphere Notes
A-1 400° – 1100° F 60″W x 60″H x 60″D Air Water or polyglycol quench. 6
A-2 170° – 500° F 72″W x 72″H x 72″D Air
A-3 170° – 500° F 72″W x 72″H x 72″D Air
Furnace Temperature Work zone Atmosphere Notes
C-1 -320° - +300° F 60″W x 36″H x 36″D Liquid Nitrogen Water or polyglycol quench.
Furnace Temperature Work zone Atmosphere Notes
F-2 400° – 1200° F 15.5″ DIA.x 16″D Air
F-3 200° – 850° F 24″W x 16″H x 18″D Air Commercial work only 7
F-4 200° – 750° F 48″W x 72″H x 48″D Air
F-6 200° – 850° F 24″W x 16″H x 18″D Air Commercial work only 7
F-7 400° – 1200° F 27″ DIA.x 30″D Air
F-10 500° – 1400° F 24″W x 20″H x 48″D Air
F-14 1400° – 2250° F 24″W x 18″H x 42″D Air / argon / nitrogen Quench capabilities are hydrogen, argon, water, oil, or air. 5
F-16 700° – 1500° F 72″W x 72″H x 96″D Air
F-17 700° – 1400° F 48″W x 48″H x 72″D Air / argon / nitrogen
Furnace Temperature Work zone Atmosphere Notes
E-11 1400° – 1950° F 24″W x 24″H x 33″D Carburizing / endo / argon Quench capabilities are hydrogen, argon, water, oil, or air. 4
E–12 1400° – 1950° F 24″W x 24″H x 33″D Carburizing / endo Quench capabilities are hydrogen, argon, water, oil, or air. 4
Furnace Temperature Work zone Atmosphere Notes
SALT – 5a 300° – 1100° F 12″ DIA. x 12" Deep Low temp salt Commercial work only 7
SALT – 5 1400° – 1700° F 17″ DIA. x 38″Deep Neutral salt Quench capabilities are hydrogen, argon, water, oil, or air. 3

Inspection equipment

Newage indentron / wilson 3jr, 4jr, 5js / ames 4-4 portable / 3000dl conductivity meter / Clark CPT PORTABLE

Production blasting

Viking 600 rubber belt blast mill – 600 lb load / sand & bead blasting capabilities

Certified metal craft

Since 1969 / 32,000 sq. Ft. / 30 employees / aerospace & commercial

Notes:

  1. Furnace capable of positive pressure quench.
  2. Furnace capable of partial pressure operation.
  3. Quench capabilities are Air, oil, or water
  4. Quench capabilities are endo atmosphere, or oil.
  5. Quench capabilities are hydrogen, argon, water, oil, or Air.
  6. Water or polyglycol quench.
  7. Commercial work only